Very correct that it is, after yet some more in DEPTH "LAB" testing this morning I realized I was wasting my time attempting "LAB" tests. As I remembered/figured out how a laser jammer works.
It keeps that distance constant. So that a speed reading cannot be obtained, although I guess now that I think of it that way the readings i was getting all the way up to 110 meters at the end of my driveway, where actually going up in distance which tells me im getting different ranges which means punch through is likely to occur.
Once again as i have described before if "Range" can be obtained which I have obtained it off both ends the front and rear now. At multipule distances. Then techinically "Speed" should be only seconds away. As the change in distance = volocity to the lidar gun.
So in essence It by all means shouldn't jam?
Although with the previous Rev. number not the latest one im running now, it JTG'd every run in a "REAL" world test of my PL2 which can be seen on my
MySpace.com - AlPiNe~ - 24 - Male - Rose City, Mi, Michigan - www.myspace.com/alpinestars_2002795 site.
This baffels me as im not sure what would change while the device is moving, as oposed to stationary? I wouldn't think anything would change?
I fear this could be a FLAW in the New Gen 3 LI jamming diodes. As my front LI's are GEN 2's.
If this is the issue LI has alot of trouble on their hands.
AlPiNe~