Use a higher end belscort users detector and go into program by depressing the two top buttons and holding at once untill the beep beep tone sounds look at the display it wil then be in the programing menu scroll with the above button on the top of the unit untill you either see a mode to change the display to hwy,spec,tec,thr.. You want to switch from hwy to spc or tec display then next time you encounter that Leo after letting the dectector get out of this menu on the x-50 you have to wait about 30 seconds and it will go beep beep beep beep and the go to spec display, on the sti driver... You can acutally depress the Power button once and it will take it out of this menu instantly without the wait NICE FEATURE ON Beltronics PART!
Now spec or tec can be off up to 100mhz at times, this is the nature of the beast not everything is perfect. IT will be close enough that you will be able to tell though! For instance, EX:
34.678 This would be 34.7 AKA Stalker Radar ka band.
OR lets show a golden eagle and the spec display discrepency.
35.450 this is actually a 35.5 ghz radar. Its just spec display is misidentifiying the actual freq do to propgation. OR it is his gun is poorly tuned.
By the way where i live 35.5ghz is the state contracted gun... I think i've encoutered a little more than the GOL. But if thats what there finds show, then yes so far they are correct. I don't beleive everything i hear.
AlPiNe~ |