Quote:
Originally Posted by MetalFlame  Yeah,with Mesta's even StingerDSI has problems.My V1 also struggles with MultaRadar-C(K-24.100GHz) and also the problem with Mesta's and MultaRadar-C is,that RD must be positioned horizontally,but then you lose range against Multanova6,which is vertically polarized.
V1 is the king of K-band,but the funny thing with V1 is,I get better detection on Ka-34.3GHz-Multanova6FM,than on K-24.100GHz MultaRadar-C.
Anyways,there's not much you can do to inprove V1's detection on K-band Mesta's.Try tilting your V1 for few degrees down.I tried that and it works better,but not much.I would also try different mounting positions.The higher is not always the better.My V1 works best when mounted under rear view mirror,tilted around 10° downwards. speedbar,take a look here: Flitsservice.nl :: Index |
Slt MetalFlame,
I thank you for your message.
It is true which does not pose a problem badly to me and I am not only unfortunately…
The mesta are on the frequency 24.125 Ghz.
The old men mesta notament the mesta 208 detection were excellent 1 kms to see more is 0.625 miles.
Now, they created new mesta very powerful notament the mesta 1000 which goes with the WIFI is which puts it in back positioning for decreased detection.
Personally, I did not cross it yet this type of radar.
In my area, there of is not several, but none has to detect with my Valentine one.
I will make a turn on the site that you gave me to see how to improve my V1, but I doubt it that it is positive.
I had positioned different way, but nothing has to make with it is radar there.
The biggest problem it is not detection but to hide it especially, it is completely illegal is thus it is rather hot in the event of road control.
Therefore, I will test in the days has have just inclined it 10° downwards to see.
Also, I decontaminated the POP mode which was worse in detection of the mesta.
Good evening.
A+ Speedbar